[{"_1":2,"_3":-5,"_4":-5},"loaderData",{"_5":6,"_7":8},"actionData","errors","root",{"_26":27,"_28":29,"_30":12,"_31":12,"_32":12,"_33":12,"_34":12,"_35":12,"_36":37},"routes/canvas.shared.$sharedTextdocId",{"_9":10,"_11":12},"sharedTextdoc",{"_13":14,"_15":-7,"_16":17,"_18":19,"_20":21,"_22":23,"_24":12,"_25":12},"isAuthenticated",false,"sharedTextdocId","6a1743a229908191b0368f1211791339","versionInt","title","Nora Combustion Flowchart","type","code/react","content","import React, { useMemo, useState } from \"react\";\nimport { AlertTriangle, CheckCircle2, Flame, Gauge, Search, Wind } from \"lucide-react\";\nimport { Card, CardContent } from \"@/components/ui/card\";\nimport { Button } from \"@/components/ui/button\";\n\nconst data = [\n {\n parameter: \"O₂ (%)\",\n icon: Wind,\n ideal: \"3–5%\",\n acceptable: \"2–6%\",\n action: \"<2% or >8%\",\n low: {\n causes: [\"Too little excess air\", \"Excessive draft\"],\n fixes: [\"Increase air\", \"Adjust barometric damper\"],\n },\n high: {\n causes: [\"Too much excess air\", \"Insufficient draft\"],\n fixes: [\"Reduce air\", \"Adjust barometric damper\"],\n },\n },\n {\n parameter: \"CO₂ (%)\",\n icon: Gauge,\n ideal: \"12–13%\",\n acceptable: \"11–13.0%\",\n action: \"<10% or >13.5%\",\n low: {\n causes: [\"Too much excess air\", \"Insufficient draft\"],\n fixes: [\"Reduce air\", \"Adjust barometric damper\"],\n },\n high: {\n causes: [\"Too little excess air\", \"Excessive draft\"],\n fixes: [\"Increase air\", \"Adjust barometric damper\"],\n },\n },\n {\n parameter: \"CO (ppm)\",\n icon: AlertTriangle,\n ideal: \"0–10 ppm\",\n acceptable: \"10–50 ppm\",\n action: \">50 ppm\",\n emergency: \"DANGER — HIGH CARBON MONOXIDE LEVELS CAN BE DEADLY\",\n warning: \"Carbon monoxide exposure can rapidly become life-threatening. Exposure may cause headaches, dizziness, nausea, confusion, loss of coordination, unconsciousness, permanent injury, and death. Occupants may not recognize symptoms before becoming incapacitated. Any unsafe CO reading requires immediate shutdown and corrective action before the appliance is returned to service.\",\n high: {\n causes: [\n \"Flame impingement\",\n \"Poor air/fuel mix\",\n \"Blocked heat exchanger\",\n \"Nozzle issues\",\n \"Draft problems\",\n \"Too little excess air\",\n \"Damaged burner head\",\n ],\n fixes: [\n \"Increase air\",\n \"Check nozzle\",\n \"Clean heat exchanger\",\n \"Verify draft\",\n \"Replace burner head if damaged\",\n ],\n },\n },\n {\n parameter: \"Stack Temp (°F)\",\n icon: Flame,\n ideal: \"350–500°F\",\n acceptable: \"300–550°F\",\n action: \"<300°F or >600°F\",\n low: {\n causes: [\"Underfired appliance\"],\n fixes: [\"Verify firing rate\", \"Verify draft\"],\n },\n high: {\n causes: [\"Dirty heat exchanger\", \"High excess air\", \"Overfired appliance\"],\n fixes: [\"Clean heat exchanger\", \"Optimize air setting\", \"Confirm nozzle and firing rate\"],\n },\n },\n {\n parameter: \"Draft Over Fire (in. w.c.)\",\n icon: Gauge,\n ideal: \"−0.01 to −0.02\",\n acceptable: \"−0.005 to −0.03\",\n action: \"Unstable\",\n low: {\n causes: [\"Blocked heat exchanger\", \"Underfiring\"],\n fixes: [\"Inspect and clean flue passes\", \"Set firing rate to manufacturer’s specification\"],\n },\n high: {\n causes: [\"Misadjusted draft regulator\"],\n fixes: [\"Adjust draft regulator\"],\n },\n },\n {\n parameter: \"Draft Breech (in. w.c.)\",\n icon: Gauge,\n ideal: \"−0.02 to −0.04\",\n acceptable: \"−0.01 to −0.06\",\n action: \"<−0.01 or >−0.06\",\n low: {\n causes: [\n \"Leaky or undersized chimney\",\n \"Leaky thimble, stack, or breech\",\n \"Chimney obstruction\",\n \"Draft regulator adjustment\",\n ],\n fixes: [\"Seal leaks\", \"Clear chimney\", \"Adjust draft regulator to manufacturer’s specification\"],\n },\n high: {\n causes: [\n \"Oversized chimney\",\n \"Cold outdoor temperature\",\n \"Misadjusted draft regulator\",\n \"Air entering combustion chamber\",\n ],\n fixes: [\"Adjust draft regulator\", \"Close or seal appliance air leaks\"],\n },\n },\n {\n parameter: \"Smoke Number\",\n icon: AlertTriangle,\n ideal: \"0\",\n acceptable: \"0–trace\",\n action: \"#1 or higher\",\n high: {\n causes: [\"Insufficient air\", \"Poor fuel atomization\", \"Dirty burner\", \"Air in fuel\"],\n fixes: [\"Increase air\", \"Check pump pressure\", \"Check nozzle\", \"Clean burner\", \"Correct fuel supply air issues\"],\n },\n },\n {\n parameter: \"Efficiency (%)\",\n icon: CheckCircle2,\n ideal: \"84–88%\",\n acceptable: \"82–90%\",\n action: \"<80%\",\n low: {\n causes: [\"Dirty heat exchanger\", \"Poor combustion setup\", \"Excessive draft\", \"Incorrect firing rate\", \"High stack temperature\"],\n fixes: [\"Clean and service appliance\", \"Perform full combustion test\", \"Verify draft\", \"Confirm nozzle and pump pressure\", \"Optimize air setting\"],\n },\n },\n];\n\nfunction Pill({ children, tone = \"neutral\" }) {\n const tones = {\n neutral: \"bg-slate-100 text-slate-800\",\n good: \"bg-emerald-100 text-emerald-800\",\n warn: \"bg-amber-100 text-amber-900\",\n danger: \"bg-red-100 text-red-800\",\n blue: \"bg-blue-100 text-blue-800\",\n };\n return {children};\n}\n\nfunction DiagnosticPanel({ item, status }) {\n const details = item[status];\n if (status === \"normal\") {\n return (\n

Reading is in range

Continue with normal combustion setup procedures and verify all related readings before leaving the appliance.

\n );\n }\n if (!details) return null;\n const label = status === \"low\" ? \"Low Reading\" : \"High Reading\";\n return (\n

{label}: Possible Causes

Recommended Fixes

\n );\n}\n\nexport default function CombustionFlowChart() {\n const [selected, setSelected] = useState(data[0]);\n const [status, setStatus] = useState(\"normal\");\n const [query, setQuery] = useState(\"\");\n\n const filtered = useMemo(() => {\n const q = query.toLowerCase();\n return data.filter((item) => item.parameter.toLowerCase().includes(q));\n }, [query]);\n\n const Icon = selected.icon;\n\n return (\n

NORA Technician Reference

Combustion Analysis Interactive Flow Chart

Select a combustion parameter, choose whether the reading is normal, low, or high, and review likely causes and corrective actions.

\n\n

\n \n \n

\n \n setQuery(e.target.value)}\n />\n

\n {filtered.map((item) => {\n const ItemIcon = item.icon;\n const active = selected.parameter === item.parameter;\n return (\n { setSelected(item); setStatus(\"normal\"); }}\n className={`w-full rounded-2xl border p-4 text-left transition hover:scale-[1.01] ${active ? \"border-blue-500 bg-blue-50 shadow-md\" : \"border-slate-200 bg-white hover:bg-slate-50\"}`}\n >\n

{item.parameter}

Ideal: {item.ideal}

\n View\n

\n \n );\n })}\n

\n \n \n\n

\n \n \n

{selected.parameter}

Use analyzer readings with manufacturer specifications and field judgment.

\n Ideal: {selected.ideal}\n Acceptable: {selected.acceptable}\n Action: {selected.action}\n

\n\n

\n \n {selected.low && }\n {selected.high && }\n

\n\n {selected.parameter === \"CO (ppm)\" && status === \"high\" && (\n

\n \n {selected.emergency}\n

\n {selected.warning}\n

\n EMERGENCY RESPONSE ACTIONS:\n

Shut down unsafe equipment immediately
If occupants report symptoms, evacuate the area and advise emergency medical evaluation
Recommend use of functioning UL-listed carbon monoxide alarms
Verify proper venting and chimney draft
Check combustion air settings and smoke
Inspect heat exchanger and flue passages
Never leave an appliance operating with unsafe CO levels

\n )}\n\n \n \n \n\n \n \n

Field Sequence

\n {[\n \"Verify appliance condition\",\n \"Check draft\",\n \"Take smoke test\",\n \"Run combustion test\",\n \"Adjust and re-test\",\n ].map((step, idx) => (\n

{idx + 1}

{step}

\n ))}\n

\n \n \n

\n\n \n

\n );\n}\n","access","public","isModerationBlocked","isAnonifyApiKeyDetected","dd",{"_38":39,"_40":41},"disablePrefetch",true,"shouldPrefetchAccount","shouldPrefetchUser","shouldPrefetchSystemHints","promoteCss","disableSSR","stripModulepreloadImports","statsigGateEvaluationsPromise",["P",37],"traceId","10730877722418673573","traceTime",1779929391601]